Condensate Filter Element

Powder resin covered filter and pre-filter are generally used in power plant condensate treatment system, the filter is installed inside the filter element, the surface of the filter element can be paved with fiber powder and yin and yang resin powder to achieve the purpose of filtration and salt removal, when the pressure difference between the import and export of the filter or the conductivity or silicon of the filter water reaches the set value, the filter is in a failure state, the filter will be burst film and backwash, and then paved again after Put into operation.

Applications

Pharmaceutical industry, food industry, electronic industry, petroleum and chemical industry, etc

Filtration mediawater suspension, particulate matter, water dirt, bacteria and algae, rust, etc

Working Principle

A certain number of filter elements are installed inside the filter. Water enters from the outside of each element and flows out through a porous tube in the centre of the element, with impurities being trapped on the surface of the element. There are two main forms of filter elements, winding filter elements when the membrane is laid and folding filter elements when the membrane is not laid. The folded filter element has a precision of 10μm at start-up and a precision of 2μm or 5μm during normal operation.

Technical parameters

Name: condensate filter element

Filter material: polypropylene fiber; skimmed cotton thread; glass fiber thread.

Filter element outer diameter: Φ50 ,Φ 60mm

Inner diameter of cartridge: Φ25,Φ28mm

Cartridge length: 70"/1778mm,60"/1524mm

Central skeleton: stainless steel 304 / 316

Maximum operating temperature: 85℃

Connection method: thread

Design flow rate: 2.9m3/h-3.2m3/h

Top structure: M6, M8, M10 thread

Bottom structure: connection thread M33×1.5, M33×2, G1, 1 3/16〃-24 BSW connection